This radio is a PDT/DMR-based digital radio that complies with IIC Ex. standard (hydrogen group). It is particularly suitable for high-risk environment such as environment with combustible and flammable gases and dusts to provide secure and reliable communications for users.
asking for a demo download brochure|
Frequency Range
|
UHF3: 350-400MHz |
| VHF1: 136-174MHz | |
| UHF1: 400-470MHz | |
| Channel Capacity | 1024 |
| Zone Capacity | 64 |
| Channel Spacing | 25/20/12.5KHz |
| Operating Voltage | 7.4V |
| Battery | 1800mAh (Li-Ion) |
|
Battey Life(5/5/90 Duty Cycle,High TX Power)
|
Analog: about 14.5hours/13hours(GPS) |
| Digital: about 17hours/15hours (GPS) | |
| Frequency Stability | ±1.5ppm |
| Antenna Impedance | 50? |
| Dimensions(H×W×D) mm | 141 x 55 x 39 |
| Weight | 495g |
| Display | 160 x 128 pixels, 65535 colors, 1.8 inch, 6 rows |
|
Anti-explosion levels
|
ATEX: |
| II 2G Ex ib IIC T4 | |
| II 2D Ex ib IIIC T120? IP5X | |
| I M2 Ex ib | |
| IECEx: | |
| Ex ib IIC T4 | |
| Ex ib IIIC T120? IP5X | |
| Ex ib I | |
| FM/CSA: | |
| Class I, Zone 1 AEx/Ex ib IIC T4 Gb | |
| Class II, III Div 1, Group E, F, G T120? -20??Ta?50? |
| RF Power Output | 1W |
|
FM Modulation
|
11K0F3E @ 12.5KHz |
| 14K0F3E @ 20KHz | |
| 16K0F3E @ 25KHz | |
|
4FSK Digital Modulation
|
12.5KHz Data Only: 7K60FXD |
| 12.5KHz Data & Voice: 7K60FXW | |
|
Conducted/Radiated Emission
|
-36dBm ?1GHz |
| -30dBm > 1GHz | |
|
Modulation Limiting
|
±2.5KHz @ 12.5KHz |
| ±4.0KHz @ 20KHz | |
| ±5.0KHz @ 25KHz |
|
FM Hum&Noise
|
40dB @ 12.5KHz |
| 43dB @ 20KHz | |
| 45dB @ 25KHz | |
|
Adjacent Channel Power
|
60dB @ 12.5KHz |
| 70dB @ 20/25KHz | |
| Audio Response | +1 ?-3dB |
| Audio Distortion | ?3% |
| Digital Vocoder Type | AMBE+2™ or SELP |
|
Sensitivity(Analog)
|
0.3?V(12dB SIN AD) |
| 0.22?V(typical)(12dB SIN AD) | |
| 0.4?V(20dB SIN AD) | |
| Sensitivity(Digital) | 0.3?V/BER 5% |
|
Adjacent Channel Selectivity
|
TIA-603: 60dB @ 12.5 KHz / 70dB @ 20&25KHz |
| ETSI: 60dB @ 12.5 KHz / 70dB @ 20&25KHz | |
|
Spurious Response Rejection
|
TIA-603: 70dB @ 12.5 / 20 / 25KHz |
| ETSI: 70dB @ 12.5 / 20 / 25KHz | |
|
Intermodulation
|
TIA-603: 70dB @ 12.5 / 20 / 25KHz |
| ETSI: 65dB @ 12.5 / 20 / 25KHz |
|
Hum&Noise
|
40dB @ 12.5kHz |
| 43dB @ 20KHz | |
| 45dB @ 25kHz | |
| Blocking | 84dB |
| Rated Audio Power Output | 0.5W |
| Rated Audio Distortion | ?3% |
| Audio Response | +1 ?-3dB |
| Conducted Spurious Emission | <-57dBm |
| Operating Temperature | -20??+50? |
| Storage Temperature | -40??+85? |
|
ESD
|
IEC 61000-4-2?level 4? |
| ±8kV?Contact? | |
| ±15kV?Air? |
| MIL Standard | MIL-STD-810 C/D/E/F/G |
| Humidity | Per MIL-STD-810 C/D/E/F/G |
| Dust & Water Protection | IP67 |
| Shock & Vibration | Per MIL-STD-810 C/D/E/F/G |
|
Horizontal Position Accuracy
|
<5m (50% probable) |
| <10m (95% probable) | |
| Cold Start (Time to First Fix) | <1 minute |
| Hot Start (Time to First Fix) | <10 seconds |
| Note | Accuracy Specs are for long-term tracking(95th percentile values>5 satellites visible at a nominal-130dBm signal strength) |